GPT Cable, Single Core PVC Insulated 80°C as per SAE J 1128
Applications
- GPT wire is used for general circuit wiring whenever SAE J1128 is specified.
- Low tension cable for use at nominal Voltage of 60V DC & 25V AC.
- For normal application with limited exposure to fluids and physical abuse.
Features
- Better Abrasion.
- Flexible conductors with thick wall insulation.
- Shock resistant.
- Crack resistant.
Technical Data
Certifications & Compliance
Cable Design Parameters
Nominal Cross sectional ( In sq mm ) | No of strand ( in no ) and single strand diameter ( in mm ) | Nominal Conductor diameter ( mm ) | Conductor Resistance at 20°C (mΩ/m) | Insulation thickness ( mm ) | Outer Diameter of Cable (mm) | |
Maximum | Nominal | Minimum | Maximum | |||
0.5 | 7/0.31 | 0.93 | 35.7 | 0.58 | 0.41 | 2.40 |
0.8 | 16/0.26 | 1.21 | 22.7 | 0.58 | 0.41 | 2.50 |
1 | 19/0.29 | 1.45 | 15.4 | 0.58 | 0.41 | 2.90 |
2 | 19/0.36 | 1.80 | 9.30 | 0.58 | 0.41 | 3.20 |
3 | 19/0.45 | 2.25 | 5.90 | 0.66 | 0.46 | 3.80 |
5 | 19/0.57 | 2.85 | 3.70 | 0.79 | 0.55 | 4.70 |
8 | 19/0.71 | 3.55 | 2.40 | 0.94 | 0.66 | 6.00 |
Disclaimer :
REACH compliance should be considered as customer specific requirement and must be specified at time enquiry if required. The information contained in this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting the cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.