TPE-E

Applications
- Any critical application that requires temperature
rating greater than 125˚C. - Engine management systems.
- Engine compartment wiring systems.
- Magneto wiring systems.
- Lamp wiring systems.
- Gear Shift Indicator wiring systems.
- Ignition Coil wiring systems.
- ISG Application

Features
- Suitable for use directly in high temperature areas without use of additional protection or heat shields due to excellent thermal and mechanical properties at high temperature.
- Very good abrasion resistance
- Passes high temperature pressure test at 200oC
- (Class F requirement)
- Passes 175oC for 3000 hours (Class E requirement)

Technical Data
Certifications & Compliance

Cable Design Parameters
Part No. | Size (Sq.mm) | Construction (No./Dia mm) | Resistance at 20°C (mΩ/m) | Ins. Thickness (mm) | O.D. (mm) | Weight (g/m) |
CB-0.13 (1.00) Endura | 0.13 | 7 / 0.16 | Max: 136 Min: 125 |
0.25 / 0.20 | 1.05 / 0.95 | 2.1 |
CB-0.22 (1.15) Endura | 0.22 | 7 / 0.21 | Max: 84.8 Min: 77.9 |
0.25 / 0.20 | 1.20 / 1.10 | 3 |
CB-0.35 (1.25) Endura | 0.35 | 7 / 0.26 | Max: 54.4 Min: 50.0 |
0.25 / 0.20 | 1.30 / 1.20 | 4.3 |
CB-0.50 (1.50) Endura | 0.5 | 19 / 0.19 | Max: 37.1 Min: 34.1 |
0.28 / 0.22 | 1.60 / 1.40 | 6 |
CB-0.75 (1.80) Endura | 0.75 | 19 / 0.24 | Max: 24.7 Min: 22.7 |
0.30 / 0.24 | 1.90 / 1.70 | 8.59 |
CB-1.00 (2.00) Endura | 1 | 19 / 0.26 | Max: 18.5 Min: 17.0 |
0.30 / 0.24 | 2.10 / 1.90 | 11.25 |
CB-2.50 (2.80) Endura | 2.5 | 37 / 0.31 | Max: 7.80 Min: 6.99 |
0.35 / 0.28 | 3.00 / 2.70 | 25.5 |
CB-4.00 (3.50) Endura | 4 | 56 / 0.30 | Max: 4.71 Min: 4.33 |
0.40 / 0.32 | 3.70 / 3.40 | 40.55 |
CB-10.00 (5.70) Endura | 10 | 80 / 0.41 | Max: 1.82 Min: 1.68 |
0.60 / 0.48 | 6.00 / 5.30 | 104.6 |
Disclaimer :
The information contained in this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting the cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.