WTA Cable, PVC Insulated 85°C as per SAE J1678
Applications
- Low-voltage Cable is designed for used at nominal Voltage of 60 V DC (60 V AC rms) or surface vehicles electrical systems.
Features
- Flexible & excellent resistance to oil and flame.
- Flexible copper conductor with thin wall insulation for reduced weight and flexibility.
- Easy of Routing.
Technical Data
| Standard | SAE J1678 |
| Nominal Voltage | 25 VAC & 60 VDC |
| Temperature Range | -40°C to +85°C |
Certifications & Compliance
Cable Design Parameters
| Nominal Cross sectional ( In sq mm ) | No of strand ( in no ) and single strand diameter ( in mm ) | Maximum Conductor diameter ( mm ) | Resistance at 20°C (mΩ/m) | Insulation thickness ( mm ) | Outer Diameter of Cable (mm) |
| Maximum | Nominal | Maximum | |||
| 0.35 | 7/0.25 | 0.76 | 53.90 | 0.20 | 1.35 |
| 0.5 | 7/0.32 | 0.97 | 34.30 | 0.20 | 1.55 |
| 0.8 | 19/0.23 | 1.17 | 23.00 | 0.20 | 1.75 |
| 1.3 | 19/0.28 | 1.45 | 15.50 | 0.20 | 2.03 |
| 2 | 19/0.36 | 1.80 | 9.44 | 0.20 | 2.39 |
| 3 | 19/0.45 | 2.30 | 6.00 | 0.24 | 3.00 |
Disclaimer :
REACH compliance should be considered as customer specific requirement and must be specified at time enquiry if required. The information contained in this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting the cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.
