EnDura™ -150

As per ISO 6722 Class D (T4)


catalog_purple_flip

Definition

EnDura™ -150 cables  are used in high temperature and critical application that requires continuous temperature rating greater than 125˚C upto 175˚C.


Construction / Materials

Conductor
Soft-annealed as per ASTM B3 with special symmetric unilay bunching for better concentricity and signal response

Insulation
Thermoplastic Elastomer with properties based on ISO-6722 Class D

Applications

Any critical application that requires temperature rating greater than 125˚C.
Engine management systems.
Engine compartment wiring systems.
Magneto wiring systems.
Lamp wiring systems.
Gear Shift Indicator wiring systems.
Ignition Coil Wiring systems.

Special Properties

Temperature rating
Class D (-40oC to 150oC).

Temperature characteristics
150oC for 3000 hours.
175oC for 240 hours (intermittent).
200oC for 6 hours.
200oC for 4 hours (with load as per size)
-40oC for 3000 hours.
-40oC impact with loads

Sandpaper Abrasion Resistance
Well above required standards.

Flame Resistance
< 5 seconds

Temperature and Humidity Cycling
Passes 40 cycles (8 hours each) as per ISO-6722 Class D requirement

Standards and specifications

Passes all requirements of ISO 6722 Class D (T4).

Passes 175oC for 3000 hours (Class E requirement)

Passes high temperature pressure test at 200oC (Class F requirement)

Very good abrasion resistance

Compatible with complete range of automotive fluids

Suitable for use directly in high temperature areas without use of additional protection or heat shields due to excellent thermal and mechanical properties at high temperature.

Compatible with hi-tech harness equipment such as high speed cutting stripping machines and ultrasonic welding.

Compatible with several commonly used vehicle oils, power steering & automatic transmission fluid, gear oil, engine coolants, ethanol, diesel & petrol.


Specifications

Balaji Part No. Size Construction Conductor resistance at 20°C Outer diameter of cable Insulation thickness
max. nominal. min.
mm2 Strands/Diameter mΩ/m mm mm
CB-0.35-7/.25MM (1.4) – 6722 D 0.35 7/.26 52 1.3±0.1 0.2
CB-0.5-19/.19MM (1.5) – 6722 D 0.5 19/.19 37.1 1.5±0.1 0.22
CB-0.75-19/.23MM(1.8) – 6722 D 0.75 19/.23 24.7 1.8±0.1 0.24
CB-1-19/.26MM (2.0) – 6722 D 1 19/.26 18.5 2.0±0.1 0.24
CB-1.5-19/.32MM (2.3) – 6722 D 1.5 19/.32 12.7 2.3±0.1 0.24
CB-2.5-19/.41MM (2.8) – 6722 D 2.5 19/.41 7.6 2.85±0.15 0.28
CB-4-19/.53MM (3.7) – 6722 D 4 19/.53 4.7 3.55±0.15 0.32
CB-6-37/.45MM (4.2) – 6722 D 6 37/.45 3.1 4.15±0.15 0.32