WXC Cable, XLPE Insulated 125°C Cable as per SAE-J-1168
Applications
- Low-voltage Cable for use At nominal Voltage of 60 V DC (60 V AC rms) or surface vehicles electrical systems
Features
- Ultra-thin wall insulation
- Flexible
- Electron Beam Cross linked
- Reduced the Cable weight
- Easier in Vehicle Routing
Technical Data
| Standard | SAE J 1128 |
| Temperature Range | Flexible -40°C to +125°C |
Certifications & Compliance
Cable Design Parameters
| Size
AWG |
Metric Cross Sectional Area (Sq .mm ) | No of Strand | Strand Diameter (mm) | Nominal Conductor Diameter (mm) | Insulation | Nominal Diameter (mm) | |
| Nominal Wall Thickness (mm) | Nominal Wall Thickness (mm) | ||||||
| 22 | 0.35 | 7 | 0.25 | 0.76 | 0.20 | 1.35 | 22 |
| 20 | 0.50 | 7 | 0.32 | 0.96 | 0.20 | 1.55 | 20 |
| 18 | 0.80 | 19 | 0.23 | 1.15 | 0.20 | 1.75 | 18 |
| 16 | 1.00 | 19 | 0.28 | 1.45 | 0.20 | 2.03 | 16 |
| 14 | 2.00 | 19 | 0.36 | 1.80 | 0.20 | 2.39 | 14 |
| 12 | 3.00 | 19 | 0.45 | 2.29 | 0.24 | 3.00 | 12 |
Disclaimer :
REACH compliance should be considered as customer specific requirement and must be specified at time enquiry if required. The information contained in this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting the cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.
