FLR2X, Single Core, Thin Wall, Crosslinked Polyethylene(XLPE) Insulated 125°C Cables
Applications
- This XLPE insulated single-core cable is used in motor and battery ground low voltage circuit applications with high temperatures (Rated for continuous use from -40°C up to 125°C), tight spaces, and where aging and abrasion resistance are necessary.
Features
- Heat resistant cable.
- High Abrasion Resistance.
Technical Data
| Standard | ISO 6722 Class-C |
| Nominal Voltage | 60 V & 600 V |
| Temperature Range | Flexible -40°C to +125°C |
Certifications & Compliance
Cable Design Parameters
Type-A
| Metric Cross Sectional Area (Sq .mm ) | No of Strand /Strand Diameter (mm) | Maximum Conductor Resistance at 20°C (ohm/km ) | Nominal Insulation Thickness (mm) | Minimum Cable Diameter
(mm) |
Maximum Cable Diameter
(mm) |
|
| Plain Copper | Sn Plated Copper | |||||
| 0.22 | 7/0.21 | 54.4 | 55.5 | 0.25 | 1.20 | 1.30 |
| 0.35 | 7/0.27 | 54.4 | 55.5 | 0.25 | 1.20 | 1.30 |
| 0.50 | 19/0.19 | 37.1 | 38.2 | 0.28 | 1.40 | 1.60 |
| 0.75 | 19/0.24 | 24.7 | 25.4 | 0.30 | 1.70 | 1.90 |
| 1.00 | 19/0.27 | 18.5 | 19.1 | 0.30 | 1.90 | 2.10 |
| 1.25 | 19/0.30 | 14.9 | 15.9 | 0.30 | 2.10 | 2.30 |
| 1.50 | 19/0.33 | 12.7 | 13.0 | 0.30 | 2.20 | 2.40 |
| 2.00 | 19/0.38 | 9.42 | 9.69 | 0.35 | 2.50 | 2.80 |
| 2.50 | 37/0.28 | 7.60 | 7.82 | 0.35 | 2.70 | 3.00 |
| 4.00 | 37/0.38 | 4.71 | 4.85 | 0.40 | 3.40 | 3.70 |
| 6.00 | 37/0.45 | 3.14 | 3.23 | 0.40 | 4.00 | 4.30 |
Type-B
| Metric Cross Sectional Area (Sq .mm ) | No of Strand /Strand Diameter (mm) | Maximum Conductor Resistance at 20°C (ohm/km ) | Nominal Insulation Thickness (mm) | Minimum Cable Diameter (mm) | Maximum Cable Diameter (mm) | |
| Plain Copper | Sn Plated Copper | |||||
| 0.35 | 12/0.21 | 54.4 | 55.5 | 0.25 | 1.20 | 1.40 |
| 0.50 | 16/0.21 | 37.1 | 38.2 | 0.28 | 1.40 | 1.60 |
| 0.75 | 24/0.21 | 24.7 | 25.4 | 0.30 | 1.70 | 1.90 |
| 1.00 | 32/0.21 | 18.5 | 19.1 | 0.30 | 1.90 | 2.10 |
| 1.50 | 30/0.26 | 12.7 | 13.0 | 0.30 | 2.20 | 2.40 |
| 2.50 | 50/0.26 | 7.60 | 7.82 | 0.35 | 2.70 | 3.00 |
| 4.00 | 56/0.31 | 4.71 | 4.85 | 0.40 | 3.40 | 3.70 |
| 5.00 | 65/0.33 | 3.94 | 4.02 | 0.40 | 3.90 | 4.20 |
| 6.00 | 84/0.31 | 3.14 | 3.23 | 0.40 | 4.00 | 4.30 |
| 10.00 | 80/0.41 | 1.82 | 1.85 | 0.60 | 5.30 | 6.00 |
| 16.00 | 126/0.41 | 1.16 | 1.18 | 0.65 | 6.40 | 7.20 |
| 20.00 | 152/0.41 | 0.955 | 0.999 | 0.65 | 7.00 | 7.80 |
| 25.00 | 196/0.41 | 0.743 | 0.757 | 0.65 | 7.90 | 8.70 |
| 30.00 | 224/0.41 | 0.647 | 0.684 | 1.30 | 9.70 | 10.90 |
| 35.00 | 276/0.41 | 0.527 | 0.538 | 1.30 | 9.60 | 11.60 |
| 40.00 | 308/0.41 | 0.473 | 0.500 | 1.40 | 11.20 | 12.40 |
| 50.00 | 396/0.41 | 0.368 | 0.375 | 1.50 | 11.50 | 13.50 |
| 60.00 | 296/0.51 | 0.315 | 0.333 | 1.50 | 13.40 | 14.60 |
| 70.00 | 360/0.51 | 0.259 | 0.264 | 1.50 | 13.50 | 15.50 |
| 70.00 | 1427/0.26 | 0.259 | 0.264 | 1.50 | 13.50 | 15.50 |
| 95.00 | 475/0.51 | 0.196 | 0.200 | 1.60 | 16.00 | 18.00 |
Disclaimer :
REACH compliance should be considered as customer specific requirement and must be specified at time enquiry if required. The information contained in this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting the cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.
