FLRYK, Single Core 105°C Cables
- These are standard wall auto cables with cold resistant properties and increased flexibility
- Cold bending test acc. to ISO 6722-1 at -50°C
- Short-term and long term ageing according to ISO 6722-1, Class B.
|Standard||ISO 6722 -1 Class-B|
|Nominal Voltage||60 V & 600 V|
|Temperature Range||Flexible -50°C to +105°C|
Certifications & Compliance
Cable Design Parameters
|Metric Cross Sectional Area (Sq .mm )||No of Strand /Strand Diameter (mm)||Maximum Conductor Resistance at 20°C (ohm/km )||Nominal Insulation Thickness||
Minimum Cable Diameter
Maximum Cable Diameter
|Plain Copper||Sn Plated Copper|
REACH compliance should be considered as customer specific requirement and must be specified at time enquiry if required. The information contained in this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of publication. When selecting the cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.